Our Low Leakage Opposed Blade Dampers feature a 100mm / nominal 4” air foil blade with flocked end seals, all aluminum construction, and a fiberglass reinforced nylon gearing system that is housed internally. No failure due to rust, corrosion, or debris accumulation. Class 1A AMCA Certified. All of our dampers are made to order with short lead times. Single and multi-sectional dampers can be easily made for normal open/close operation as well as face & bypass operation.
Product Construction Details:
Blade
Part# PS100
Material: Aluminum 6063
Dimension: 4 in / 100 mm
Treatment: T5
Finish: Mill
GA12T Gasket: TPE-V and PP Thermoplastic Rubber
Frame
Material: Aluminum 6063
Dimension: Nominal 5 in wide, U-shape
Treatment: T5
Finish: Mill
CPS93 Gear Kit
Part# CPS93
Material: Copolymer polypropylene and fiberglass
*Optional flame retardant V-5
Blade Blocks In Side and Intermediate Casing
Material: Polyammide and fiberglass PA6 + GF 20%
Color: Black
Control
1/2 in Galvanized Steel Square Control Shaft
Part# PFE190 – 190mm length
Part# PFE120 – 120mm length
*Optional Add-Ons
Part# MPS93 – Manual Handle
Material: Die-Cast Aluminum
Part# PMS80 – Mounting plate for motor
Material: EN AW 6060 Aluminum
Fasteners Used
Part# VTE1000 – 7mm hex-head screw
Part# Screw – 1/2″ Truss head
Material – Zinc-Plated Steel
Working Temperature
Minimum: -20 °C
Maximum: 80 °C
Single Section Maximum Width: 55 in.
