Modular Framing Systems is proud to announce that our inventory of aluminum panels manufactured by P3 has arrived! The new panels have textured aluminum on one side and silver pre-varnished on the other. We also currently stock panels with galvanized skin inside and out with one side pre-varnished in a light beige color. Panels can be ordered in full sheets or cut & trimmed to spec.

Browse the brochure pages in the photo gallery below or download the PDF for faster viewing. 2020 MFS- P3 Panel AHU eCatalog.

Description Thermal conductivity  at 10° W/(m K) U value

W/(m2 K)

R value

(m2 K)/W

U value

Btu/(h ft2 °F)

R value

 (h ft2 °F)/Btu

Aluminum Part#7113314225

Galvanized Part#16ZG25

Panel 25 mm thick

Nominal 4ft x 10ft sheet

0.024 1 1 0.176 5.68
Aluminum Part#7113314245

Galvanized Part#16ZG50

Panel 45 mm thick

Nominal 4ft x 10ft sheet

0.024 0.54 1.85 0.095 10.52

The foam core is produced using the manufacturer’s globally patented Hydrotec formulation which uses water as a blowing agent. The Hydrotec formulation has the advantage of being an environmental friendly production method with a Global Warming Potential (GWP) of 0 and Ozone Depletion potential (ODP) of 0. Both factors are very important in projects designed according to regulations for LEED, BREEAM etc..

Internal and external surface with 0.5mm (0.019 inch) metal sheet; hydrotec foam 44-47kg/m3 (2.7-2.9lb/ft3); dimension 302×125 cm (118.9×49.2 inch) 25 or 45.5 mm thick (1 or 1.8 inch)

To achieve an R 12 insulation rating, a panel 52 mm (2.05 inches) thick is required.



Panel Quote Request

  • Please provide dimensions in inches, quantities, and any specific information required for your panels.
  • This field is for validation purposes and should be left unchanged.